The high frequency electricity knife matters needing attention

1, adjustable components inside the equipment before delivery has adjusted the removable parts and no users, users, please don't open the adjust or remove the internal components.

2, connect this equipment net power and ground wire electrical facilities must meet the national standard requirements.

3, in addition to the power cord, this equipment all attachments are not direct contact with the power supply network, otherwise, will damage to the equipment and accessories, there will be other even more dangerous.

4, please read the instructions carefully, and according to the manual operating equipment.

5, equipment work should be placed stably, strong, prevent cable drag drop.

6, surgical accessories (including unipolar electrode, neutral electrode and a bipolar electrode) use and the matters needing attention, please refer to the corresponding specification.

7, surgical accessories for disinfection, please see the relevant attachments.

8, in use process, avoid bipolar forceps between two tweezers tip and unipolar rotary cutter and a short circuit between the neutral electrode, interfere with the work state, affect the use of the equipment; Such as a power display flashing phenomenon of interference, when the power is shut down equipment, reopened.

9, the metal must not be inserted into the hole, and do not make the liquid flow into the machine so as not to cause accidents or damage to the equipment.

10, this equipment is the random parts or accessories, are through strict test, can be used with this equipment. Unless it is forbidden to use test approved accessories or attachments, in order to avoid damage to equipment, to the staff at risk.

11, this equipment is the random accessories or attachments, if any damage, can be directly to buy from our company.

12, this equipment has the protection of defibrillator discharge effect, and has set up a device in the special mark in the front panel.